Introduction

Two of the areas where we've seen the most growth in the last few years are notebooks and flat-panel displays. The reasons for the tremendous growth differ, of course. Notebooks are a hot item because people are becoming enamored with wireless networks and portability, while LCDs have become popular because few manufacturers are making CRTs anymore and the small footprint of LCDs is desired by many people. We're working on increasing our coverage of both of these sectors, but up until now we haven't actually taken a close look at where they intersect.

Since the first laptops began shipping, LCDs have been the de facto display standard. Years before most people were using LCDs on their desktop, laptops were sporting these thin, sleek, attractive displays. As anyone who used one of the earlier laptops can tell you, however, the actual quality of the LCD panels was often severely lacking. With the ramp up in production of both LCD panels and notebook computers, you might be tempted to assume that the quality of laptop displays has improved dramatically over the years. That may be true to a certain degree, but with power considerations being a primary factor in the design of most notebooks, compromises continue to be made.

Without even running any objective tests, most people could pretty easily tell you that the latest and greatest desktop LCDs are far superior to any of the laptop LCDs currently available. While desktop LCDs have moved beyond TN panels to such technologies as S-IPS, S-PVA, and S-MVA we are aware of only a few laptop brands that use something other than a TN panel. (Unfortunately, we have not yet been able to get any of those laptops for review.) We have also complained about desktop LCDs that have reached the point where they are actually becoming too bright, in an apparent attempt to win the marketing war for maximum brightness. The same can't be said of laptops, as very few can even break the 200 cd/m2 mark. Individual preferences definitely play a role, but outside of photography and print work most people prefer a brightness setting of somewhere between 200 and 300 cd/m2.

Luckily, there are plenty of new technologies being worked on that aim to improve the current situation. Not only should we get brighter laptop panels in the near future, but color accuracy may improve and power requirements may actually be reduced relative to current models. LED backlighting is one technology that holds a lot of promise, and it has only just begun to show up on desktop LCDs. Dynamic backlighting - were the brightness of some LEDs can be increased or decreased in zones depending on what content is currently being shown - is another technology that we may see sooner rather than later. Then there are completely new display technologies like OLED.

With the current laptop landscape in mind, we have decided that it's time for us to put a bigger focus on the quality of laptop LCDs. To accomplish this we have put together a roundup of the current notebooks that we have in-house. Future laptop reviews will continue this trend by including a section covering display analysis and quality, but we wanted to build a repertoire of past notebook displays in the meantime. While we only have four laptops at present, it is also important to remember that there are only a few companies that actually manufacture LCD panels. We would also expect any companies that release notebooks with higher-quality LCDs to make a bullet point out of the fact, which means that if you don't see any particular emphasis placed on the display panel in a notebook's specifications it probably has a panel similar to one of the laptops we're looking at today.

Test Setup
Comments Locked

55 Comments

View All Comments

  • strikeback03 - Tuesday, May 22, 2007 - link

    You actually need hardware as well as software for color calibration - IIRC the Monaco Optix system they use is somewhere in the $300-400 range. There are cheaper alternatives depending on what you need out of the package though.
  • Skobbolop - Tuesday, May 22, 2007 - link

    well... it's all about battery life is it not?... personally i think i would go for the low quality lcd with low power consumption, instead of the high quality LCD with high power requirements.... but that's just me :D
  • JarredWalton - Tuesday, May 22, 2007 - link

    I don't know... if darker lights save battery life (makes sense), why not just give users the option of dimming the lights when on battery power? The G2P allows a larger range of brightness than the others, though I didn't specifically test battery life at various settings. (3 hours per pass of a battery test can take a long time.) Anyway, I'd personally like to have both high quality and long battery life, with the ability to emphasize one depending on my current use of the laptop.
  • bitacom - Wednesday, August 14, 2013 - link

    jual lcd laptop, keyboard laptop, battery laptop, dan spare part laptop
    kunjungi
    atau hubungi 0857 1166 5051
    kami memberikan garansi 3 bulan
  • bitacom - Wednesday, August 14, 2013 - link

    jual lcd laptop, keyboard laptop, battery laptop, dan spare part laptop
    kunjungi www. bitacom. asia
    atau hubungi 0857 1166 5051
    kami memberikan garansi 3 bulan

Log in

Don't have an account? Sign up now